Biography

L4M1試験の準備方法｜信頼できるL4M1合格記試験｜高品質なScope and Influence of Procurement and Supply英語版

CIPSのL4M1資格認定証明書を持つ人は会社のリーダーからご格別のお引き立てを賜ったり、仕事の昇進をたやすくなったりしています。これなので、今から我々社JapancertのL4M1試験に合格するのに努力していきます。弊社のCIPSのL4M1真題によって、資格認定証明書を受け取れて、仕事の昇進を実現できます。

CIPS L4M1 認定試験の出題範囲：

トピック
出題範囲

トピック 1

• コンプライアンスの必要性を理解し分析する：このセクションでは、コンプライアンス担当者とセクター別の調達マネージャーが、次のようなさまざまな経済および産業セクターを理解するスキルを測定します。

トピック 2

• 手順、戦略、マニュアル、および内部機能の関与。

トピック 3

• 商品やサービスの調達時の主要な手順を理解し、分析します。このセクションでは、調達プロセス、計画、サプライヤーの選択、契約管理の各段階を識別および評価する際の購買マネージャーと調達担当者のスキルを測定します。

トピック 4

• 調達とサプライ チェーン管理を通じて付加価値を理解し、分析します。この試験セクションでは、調達と供給における付加価値の成果を特定し、コスト削減、サービスの改善、イノベーションの貢献を評価することに関連するサプライ チェーン マネージャーのスキルを測定します。また、付加価値に貢献する調達と供給のプロセスも測定します。

 

>> L4M1合格記 <<

試験の準備方法-信頼的なL4M1合格記試験-高品質なL4M1英語版

今日、激しい競争の時代に、才能が飽和している市場でどのように位置を占めることができますか？答えは証明書です。証明書の主なものは何ですか？あらゆる種類の試験L4M1認定、あらゆる種類の資格認定を通してあなたを証明します。見つけるのは難しくありません。より多くの人々がL4M1試験ガイドに時間と労力を割いて喜んでいます。L4M1認定は簡単なものではないため、多くの人が効率的な学習方法を探しています。L4M1試験の質問は、L4M1試験に合格するための適切なツールです。

CIPS Scope and Influence of Procurement and Supply 認定 L4M1 試験問題 (Q35-Q40):

質問 # 35
Explain 5 stages of the sourcing cycle that occur in the pre-contract stage (25 points)

正解：

解説：
See the solution in Explanation part below.
Explanation:
How to approach this question:
- The Sourcing Cycle is the first half of the CIPS Procurement Cycle and includes these steps:
1) Define Business Need
2) Market Analysis + Make vs Buy
3) Develop Strategy and Plan
4) Pre-Procurement Market Testing
5) Develop Documents and Specification
6) Supplier Selection
7) Issue Tender
8) Bid Evaluation
9) Contract Award and Implementation
Your response should detail 5 of these. It is a good idea to pick the ones you know most about and where there is more to write about. You won't get any extra points for naming more than 5 so focus on getting as much detail down about 5, rather than explaining more of them.
Essay Plan
Introduction - explain what the sourcing cycle is - the stages of the procurement cycle before a contract is signed. It describes the steps an organisation will take to source/ procures goods or services.
Paragraph 1 - Define the business need
How is the need identified? E.g. by end user, stores department, ERP system.
Procurement should challenge this - is it really necessary? Suggest alternatives - this could be a key source of added value
Put together business case / requisition / project initiation document
What type of purchase? Straight rebuy, modified rebuy, new purchase
Decide on what type of specification would be best - Conformance vs performance specification
This stage may include early supplier involvement
Paragraph 2 - Market Analysis and Make vs Buy Decision
Create an Analysis by segmenting the market by buyer, product, distribution channel, geography, customer market etc.
Make vs Buy - use Carter's Matrix to decide whether the organisation should make vs buy.
Also consider outsourcing at this stage
Paragraph 3 - Documents and Specification
Draft documents. These may include a RFQ or ITT, a specification and a proposed form of contract
Specification may be conformance or performance based
A contract sets out the roles, rights, responsibilities and obligations of the parties and shows intention to enter into 'legal relations'
This stage defines the 'offer' which becomes binding once other party accepts
Documentation may also include proposed KPIs and SLAs
Paragraph 4 - Supplier Selection
For a new purchase, supplier selection is very important - investigation should be proportionate to the value of the procurement. For rebuys or low-risk purchases you could use the same supplier or a list of pre- approved suppliers.
You can locate potential suppliers by; catalogues, websites, trade registers, market exchanges and review sites, trade or industry press, fairs and conferences, networking and recommendations/ referrals.
You can shortlist suppliers by sending out a pre-qualification questionnaire. This adds value by reducing wasted time / costs / risks to entering into a contract with the wrong supplier.
Other criteria for supplier selection include using Carter's 10 Cs (competency, consistency, capability, control, cost, cash, clean, communication, culture, commitment), thesupplier's financial standing (e.g.
liquidity and gearing), references and considering their CSR policy.
Paragraph 5 - Issue Tender
Competitive bidding should only be done when there's sufficient time and resources available, there's sufficient suppliers in the marketplace, they're keen to win business (ie that there's appetite for competition) and there is a strong specification
Best practice is to issue tenders electronically as it ensures equal treatment of suppliers and transparency
Consider open vs closed procurement processes
Use a cross-functional team - particularly when marking responses
Conclusion - you could mention here that different sourcing activities may require more or less effort at each of the stages e.g. procuring a new item may require more market analysis than a re-buy.
Tutor Notes:
- If you want to add in extra details, you could think about ways procurement can add value at each stage
- In the old syllabus, CIPS were a bit obsessed with Michael Porter. In the Market Analysis bit you could talk about using Porter's 5 forces (buyer and supplier power, threat of new entrants, threat of substitutions, supplier rivalry) and Porter's 3 generic strategies for competing (cost leadership, differentiation, niche segment). This has been removed from the study guide so it's not essential to know this for this module, but if you've seen it before it's a nice one to throw in.
- You could also mention that there are differences between the public and private sector procurement at the different stages. E.g. Public Sector requires open competitions for contracts of a certain value and must follow the rules set out in Public Contract Regulations - the private sector doesn't have such strict regulations so there is much more flexibility in how tenders are completed. Also in the public sector, the evaluation criteria needs to be agreed beforehand and presented in the ITT- not the same for the private sector.
- Study guide p.71

 

質問 # 36
Explain what is meant by the term Inventory Management System? Describe MRP and ERP systems explaining when they are used and the advantages and disadvantages of using them (25 points)

正解：

解説：
See the solution in Explanation part below.
Explanation:
How to approach this question:
- Definition of Inventory Management System - a system, usually a piece of digital software, that helps an organisation manage their inventory. It oversees the process of ordering stock, receiving it, storing it and converting it into finished goods. Used predominantly in manufacturing organisations. MRP and ERP are types of IMS.
- MRP - Material Requirements Planning- this is a planning, scheduling, and inventory control system used to manage manufacturing processes. Most MRP systems are software-based. The aim is to automate and improve the efficiency of ordering and processing raw materials.
- ERP - Enterprise Resource Planning - this system uses MRP but also includes other operations such as finance, so allows for budgeting and forecasting, and customer relations. ERP gives an organisation a more holistic overview compared to MRP which just focuses on manufacturing.
- When they are used - predominantly in the manufacturing industry for the ordering of goods. Not used for services. Used when there is a lot of maths involved in figuring out how much of something to order and when e.g. a chocolate manufacturer who needs to produce 50,000 chocolate bars a day. MRP / ERP helps the organisation know what to order, how much and when. It helps achieve the 5 Rights of Procurement.
- Advantages - the advantages of MRP and ERP are very similar and in most cases the same: more accurate than manual processes, quicker response times, automated process frees up people to complete more added value tasks, flexibility, has real time information to inform on decision making, improved responsiveness to customers, improved supply chain management, reduction in costs.
- Disadvantages - expensive, complicated, can break down or be hacked (as they're digital systems), only as good as the information put into them. training required to use.
Example Essay:
IMS
An Inventory Management System (IMS) is a software application or set of tools designed to oversee and optimize the management of a company's inventory. The primary goal of an inventory management system is to maintain an accurate record of stock levels, streamline the procurement process, and ensure efficient order fulfilment. This system plays a crucial role in supporting businesses by helping them avoid stockouts, reduce excess inventory, and enhance overall supply chain efficiency.
Inventory Management Systems have the following functions: demand management (which assists with forecasting, and helps the avoidance of overstocking), helps to control stock levels (by stating minimum and maximum levels), replenishment of stock in line with policies, allows automatic reordering when stock levels get low, tracks stock movements (e.g. around a warehouse), allows communication with suppliers and end users, and helps increase safety by ensuring stock isn't damaged or deteriorating.
MRP
MRP stands for Material Requirements Planning, and it is a computer-based inventory management and production planning system used by businesses to optimize the management of materials, components, and finished products in the manufacturing process. MRP is a key component of Enterprise Resource Planning (ERP) systems, focusing specifically on the planning and control of materials and production resources.
MRP systems uses 3 main modules: 1. Master Production Schedule- information on customer orders, forecast orders, customer requirements and stock orders 2. Bill of Materials - the recipe / breakdown of components of the finished product and 3. Inventory Status File - tells you the current stock levels.
How MRP works- For example, a customer wants to order a new sofa. 1. input the customer order into MRP
2. Check finished stock and if there's a sofa, give the customer that sofa. If there isn't a sofa in stock, the MRP system will look at the Bill of Materials- looking at individual materials needed to make the sofa and will order these, factoring in lead times 3. confirm to customer what the lead time is on getting their new sofa, based on delivery time of materials and time to make it.
MRP is a simple system - it doesn't take into account other business processes and can go wrong due to inaccurate or outdated information.
Advantages of the MRP process include the assurance that materials and components will be available when needed, minimised inventory levels, reduced customer lead times, optimised inventory management, and improved overall customer satisfaction.
Disadvantages to the MRP process include a heavy reliance on input data accuracy (garbage in, garbage out), the high cost to implement, and a lack of flexibility when it comes to the production schedule.
ERP
This is business management software which is used to collect, store, manage, and interpret data from many business activities. It uses MRP but also includes other operations such as finance, HR and customer services.
Therefore it's more powerful than MRP. Where MRP can tell you how much of something to order and what the lead times are, ERP can also consider how many staff are available each day (by looking at holidays and sickness) and factor this into the manufacturing process. It can also produce accurate financial data, manage customer and supplier relationships.
ERP facilitates information flow between all business functions and manages connections to outside stakeholders. SAP and Oracle are examples of ERP systems. There is also ERP II - this extends the system to include links with suppliers and supply chain stakeholders One of the primary advantages of implementing an ERP system is the integration of information across various departments. By providing a unified view of an organization's operations, an ERP system ensures that different functions work with synchronized and consistent data, fostering improved decision-making and collaboration.
Operational efficiency is another significant benefit of ERP systems. Through the automation of routine tasks and streamlined processes, organizations can achieve greater efficiency, reduce manual errors, and enhance overall productivity.
However, one of the primary disadvantages is the high initial implementation costs. Organizations must invest in software licenses, training programs, and customization to align the ERP system with their specific needs.
The complexity of ERP systems and potential customization challenges can pose difficulties, requiring expertise and resources for successful implementation.
Resistance to change among employees is a common hurdle when introducing ERP systems. Employees may be hesitant to adopt new processes and technologies, leading to a slower transition period and potential inefficiencies during the learning curve. Organizations also become dependent on ERP vendors for updates, support, and maintenance, and switching vendors can be disruptive and costly.
In conclusion, while MRP and ERP systems offer numerous advantages in terms of operational efficiency, data integration, and strategic planning, organizations must carefully weigh these benefits against the associated challenges. A well-planned and effectively implemented system can contribute significantly to an organization's success, but the decision to adopt such a system should be approached with a thorough understanding of both its advantages and potential drawbacks.
Tutor Notes
- This is a really hard topic if you don't have a manufacturing background. The way I think about it is this- imagine you're Cadbury's and you're coming up to Easter. How much sugar do you need to buy and when do you need to buy it in order to make all your Easter Eggs? Hard question right? Well MRP / ERP is the clever software that figures that all out for you. It will tell you how much sugar needs to be bought on what day, in order for the delivery time to be right for manufacturing. It will consider storage costs and how quickly Easter Eggs get made in the factory. It's honestly so clever. Feel free to use that example in your essay. Examples like that show the examiner you understand the topic.
- Although they're fabulous systems, using MRP and ERP systems doesn't guarantee success- at the end of the day they're just software- the key to success is in the accuracy of the data that's inputted into the systems and how the systems are used. That would make a strong conclusion.
- This is a good simple video that explains the topic: What is Materials Requirement Planning (MRP)?
(youtube.com) I also like watching How Its Made - a documentary series about factory life. You can find it on BBC Iplayer. If you don't have a manufacturing background it helps give context to some of these dry subjects like MRP and Just-in-Time manufacturing.
- LO 3.4 p. 175

 

質問 # 37
What is an electronic system? Describe the following: e-requisitioning, e-catalogues, e-sourcing, e-payment technologies (25 marks)

正解：

解説：
See the solution in Explanation part below.
Explanation:
How to approach this question:
- Your response will need 5 definitions. For 25 points that means 5 points per section so think about the level of detail you'll need to include. It would be 5 points for electronic system (i.e. your introduction and conclusion), and then do a paragraph on each of the technologies. In the description you could talk about why it's used and the advantages, and give some examples if you know any.
- Definition of electronic system - a system which uses some form of technology and automates a procurement process than would otherwise have been completed manually.
- E-Requisitioning - a way of ordering goods or services. Includes the use of integrated ordering systems such as: ERP/ ERP II / MRP / MRP II
- E-Catalogue- an electronic display of what goods can be ordered. A simple example of this may be a supplier displaying the goods they offer on their website and the prices to purchase the goods.
- E-Sourcing - this involves the early stages of the tender process- using an electronic portal to find a supplier and / or conduct a tender exercise.
- E-Payment - the P2P part of the cycle (procure to pay) - may involve electronic POs and Invoices, BACS, CHAPS and SWIFT payment systems, and the use of Purchasing Cards Example essay:
Electronic systems, commonly refered to as E-procurement, is the business-to-business or business-to- consumer purchase of goods or services, typically using the Internet or other information/ networking systems such as ERP systems. It has developed in the past 20 years as technology has improved and replaces time- consuming manual processes and is now considered the 'norm'. Electronic systems and e-procurement can be used throughout the entire supply chain- not just between a single buyer and supplier. Examples of electronic systems including the following:
E-requisitioning
This is often used in manufacturing organisations to order raw materials. An electronic 'bill of materials' is created and stock levels are automatically updated. As materials get used and a pre-determined level is reached, this triggers a new order which is placed via an e-requisitioning system such as MRP. It is a technological version of the traditional kan-ban (2 bin) system. E-requisition tools are often cloud-based. It helps buyers simplify the buying process, track orders and provides higher levels of visibility on spend. The main disadvantage to this technology is that it requires technology interfacing between the buyer and suppler, which may be expensive.
E-catalogues
This is a digital or online version of a catalogue- a document that details what you can buy and at what price.
There are two main types - buy side catalogues and sell side catalogues. A buy-side catalogue is an internal system used by a buyer which hosts a list of pre-approved suppliers from whom purchases can be made. It may include details of commonly bought items and the prices. The use of this reduces maverick spending and ensures consistency in purchases (e.g. whenever lightbulbs need to be ordered, the same lightbulbs are ordered so the office lighting is consistent). A sell-side catalogue is provided by a supplier and details what they offer- it often includes prices, any discounts for bulk buying and may also let buyers know of availability (e.g. the website may say only two items remaining). This may be as simple as a price list on their website, available for anyone to view.
E-sourcing
This is a tool that helps a buyer find the most suitable supplier. Examples include e-tendering websites where a buyer can host a competition to find a supplier. E-auctions are also a type of e-sourcing tool. The tool (often a website) hosts all of the tendering documents and allows for buyers and suppliers to communicate during the tender process (for example if there are any clarifications needed on the specification). Using this tool allows for transparency and equal treatment, but also saves time in completing the tender exercise. PQQs can be automated and some e-sourcing tools include the use of Artificial Intelligence which can 'read' tender submissions and automatically exclude suppliers who do not fulfil the required criteria.
E-payment technologies
These are methods to pay for goods and services that replace the need for cash and cheques. Examples include online bank transfers, electronic Purchase Orders and Invoices and the use of Pre-Payment cards. These act like credit cards for employees to use when they need to buy supplies. For example, if you have a maintenance team that frequently need to purchase low-value items like screws and paint, you could issue the team with a Pre-Payment card with a certain limit (e.g. £500/ month) so they can buy what they need. The company will then automatically be sent a monthly invoice for all of the purchases. This saves time from having to issue the maintenance team with petty cash for the purchases and allows for greater visibility over spend (e.g. how many screws are typically bought per year?). Another typical use is for staff travel.
In conclusion, procurement teams benefit significantly from leveraging electronic tools, including e- requisitioning, e-catalogues, e-sourcing, and e-payment technologies. The adoption of these electronic tools brings about various advantages that enhance efficiency, transparency, cost-effectiveness, and overall effectiveness in the procurement process. Moreover E-procurement tools has helped develop the procurement function into a professional and respected function and allows for a more pro-active rather than reactive approach to purchasing.
Tutor Notes:
- Fun Fact! In the public sector, it is mandated that electronic systems are used in procurement (Public Contract Regulations 2015) as this helps to achieve the objectives of transparency and equal treatment. Where manual systems are used, it is easy to manipulate the tender process. For example, a buyer could read some tender submissions before the deadline for submission and no one would know, but with an electronic system this is impossible as it locks evaluators out until the deadline has passed and all bidders have submitted their responses. (note PCR 2015 is being replaced in 2024- details are still TBC but the above fun fact will still remain in the new legislation- they're definitely still going to make it compulsory).
- You could also mention the names of systems if you know any. For example, e-sourcing tools include MyTenders.com and Delta E-Sourcing. PO / Invoice systems include Sage, Xero and QuickBooks.
- The question doesn't ask for advantages of using these technologies but you could mention this in your answer. Just be sure that this isn't the focus of your response- the question asks specifically for you to DESCRIBE the systems so detailed Explanation: s and examples are where you will secure the most points.
- p.108

 

質問 # 38
Describe the main differences between the three economic sectors: public, private and third. Your answer may make reference to the following: funding, ownership, shares, objectives and administration (25 marks)

正解：

解説：
See the solution in Explanation part below.
Explanation:
How to approach this question
- Sometimes CIPS give you a steer on how to answer the question. My advice is to follow it. The question says you MAY make reference to the following, but I'd use those hints as a guide for content- a paragraph on each and you're done!
- When you've got a 'may make reference to' hint - this means you can completely ignore it and do your own thing and bring in your own ideas. May means it's optional, so you wouldn't be penalised for this. However, you have to consider the examiner's mark scheme- it will detail options of stuff you can write for funding, ownership etc. Then there will be a line at the bottom saying something like 'accept other options such as x and y'. This leaves it up to the examiner to decide whether what you've said is relevant. I'd personally not leave it up to chance you get a lenient examiner. If you write what's definitely going to be on their mark scheme, you're more likely to get more points.
Example Essay
The modern economy is a complex tapestry of various sectors, each with its own distinct characteristics and functions. The three prominent sectors are the public sector, the private sector, and the third sector. These sectors differ significantly in terms of their funding mechanisms, ownership structures, objectives, the concept of shares, and their administration.
Firstly, the public sector is predominantly funded by the government through taxation, grants, and other forms of public revenue. Its very existence hinges on the provision of essential services and the fulfilment of societal needs. These organizations are owned by the government, be it at the federal, state, or local level. Unlike the private sector, the concept of shares doesn't apply in the public sector. Instead, the government allocates budgets to various departments and agencies for public services and projects. The primary objectives of the public sector revolve around the welfare of the citizens, including the provision ofeducation, healthcare, defence, and infrastructure. It is characterized by bureaucratic administration, with decision-making processes subject to governmental regulations and oversight. A prime example is public schools and healthcare systems, which are funded and operated by the government with the primary objective of ensuring universal access to education and healthcare services.
In contrast, the private sector operates on a starkly different paradigm. It is primarily funded by private capital, investment, and profit-seeking activities. Private individuals and corporations own these entities, with ownership shares often represented by stocks. Shareholders invest capital in exchange for ownership stakes and the potential for dividends. The central objective in the private sector is profit maximization, driven by competition in the market. Companies in the private sector are administered by management teams and boards of directors, with decisions guided by market forces. Apple and ExxonMobil are examples of private sector entities, privately owned and publicly traded, with profit motives at their core. Shareholders invest in these companies with the expectation of financial returns.
Lastly, the third sector, often referred to as the nonprofit or voluntary sector, represents a unique economic sphere. It relies on a combination of funding sources, including donations, grants, and earned income, but not taxation. Third sector organizations are not owned by individuals or shareholders; instead, they are governed by boards of directors or trustees. Unlike the private sectors, shares are not applicable in the third sector.
These organizations do not seek to distribute profits to owners. The primary objective of the third sector is to serve a social or community purpose, such as addressing societal issues, promoting social change, and providing services that benefit the public. Administration in this sector is overseen by non-profit boards, and it heavily relies on volunteers, philanthropy, and community engagement. For example, the Red Cross operates with the objective of providing humanitarian aid and disaster relief, relying on donations and volunteers to fulfil its mission. Any profits that are made are reinvested into the organisation to further its mission.
In conclusion, the public, private, and third sectors represent diverse economic domains, each with its own funding mechanisms, ownership structures, objectives, and administrative models. These sectors play essential and complementary roles in society, contributing to economic development, public welfare, and social progress. Together, they form the foundation of a balanced and dynamic economic landscape.
Tutor Notes
- I've structured this essay with a paragraph on each sector, but you could have done a paragraph on each theme, thus having 5 paragraphs instead of 3. Either approach works.
- You've got 5 things and 3 sectors, that equals 15 marks. If you give an example of each and a strong intro and conclusion, that's full marks.
- See LO 4.1 p. 203 - there's a cute table with this information on.

 

質問 # 39
Explain 5 stages of the sourcing cycle that occur in the pre-contract stage (25 points)

正解：

解説：
See the solution inExplanation partbelow.
Explanation:
How to approach this question:
- The Sourcing Cycle is the first half of the CIPS Procurement Cycle and includes these steps:
1) Define Business Need
2) Market Analysis + Make vs Buy
3) Develop Strategy and Plan
4) Pre-Procurement Market Testing
5) Develop Documents and Specification
6) Supplier Selection
7) Issue Tender
8) Bid Evaluation
9) Contract Award and Implementation
Your response should detail 5 of these. It is a good idea to pick the ones you know most about and where there is more to write about. You won't get any extra points for naming more than 5 so focus on getting as much detail down about 5, rather than explaining more of them.
Essay Plan
Introduction - explain what the sourcing cycle is - the stages of the procurement cycle before a contract is signed. It describes the steps an organisation will take to source/ procures goods or services.
Paragraph 1 - Define the business need
How is the need identified? E.g. by end user, stores department, ERP system.
Procurement should challenge this - is it really necessary? Suggest alternatives - this could be a key source of added value
Put together business case / requisition / project initiation document
What type of purchase? Straight rebuy, modified rebuy, new purchase
Decide on what type of specification would be best - Conformance vs performance specification
This stage may include early supplier involvement
Paragraph 2 - Market Analysis and Make vs Buy Decision
Create an Analysis by segmenting the market by buyer, product, distribution channel, geography, customer market etc.
Make vs Buy - use Carter's Matrix to decide whether the organisation should make vs buy.
Also consider outsourcing at this stage
Paragraph 3 - Documents and Specification
Draft documents. These may include a RFQ or ITT, a specification and a proposed form of contract
Specification may be conformance or performance based
A contract sets out the roles, rights, responsibilities and obligations of the parties and shows intention to enter into 'legal relations'
This stage defines the 'offer' which becomes binding once other party accepts
Documentation may also include proposed KPIs and SLAs
Paragraph 4 - Supplier Selection
For a new purchase, supplier selection is very important - investigation should be proportionate to the value of the procurement. For rebuys or low-risk purchases you could use the same supplier or a list of pre-approved suppliers.
You can locate potential suppliers by; catalogues, websites, trade registers, market exchanges and review sites, trade or industry press, fairs and conferences, networking and recommendations/ referrals.
You can shortlist suppliers by sending out a pre-qualification questionnaire. This adds value by reducing wasted time / costs / risks to entering into a contract with the wrong supplier.
Other criteria for supplier selection include using Carter's 10 Cs (competency, consistency, capability, control, cost, cash, clean, communication, culture, commitment), thesupplier's financial standing (e.g. liquidity and gearing), references and considering their CSR policy.
Paragraph 5 - Issue Tender
Competitive bidding should only be done when there's sufficient time and resources available, there's sufficient suppliers in the marketplace, they're keen to win business (ie that there's appetite for competition) and there is a strong specification
Best practice is to issue tenders electronically as it ensures equal treatment of suppliers and transparency
Consider open vs closed procurement processes
Use a cross-functional team - particularly when marking responses
Conclusion - you could mention here that different sourcing activities may require more or less effort at each of the stages e.g. procuring a new item may require more market analysis than a re-buy.
Tutor Notes:
- If you want to add in extra details, you could think about ways procurement can add value at each stage
- In the old syllabus, CIPS were a bit obsessed with Michael Porter. In the Market Analysis bit you could talk about using Porter's 5 forces (buyer and supplier power, threat of new entrants, threat of substitutions, supplier rivalry) and Porter's 3 generic strategies for competing (cost leadership, differentiation, niche segment). This has been removed from the study guide so it's not essential to know this for this module, but if you've seen it before it's a nice one to throw in.
- You could also mention that there are differences between the public and private sector procurement at the different stages. E.g. Public Sector requires open competitions for contracts of a certain value and must follow the rules set out in Public Contract Regulations - the private sector doesn't have such strict regulations so there is much more flexibility in how tenders are completed. Also in the public sector, the evaluation criteria needs to be agreed beforehand and presented in the ITT- not the same for the private sector.
- Study guide p.71

 

質問 # 40
......

CIPSのL4M1認定試験に受かることを悩んでいたら、Japancertを選びましょう。JapancertのCIPSのL4M1試験トレーニング資料は間違いなく最高のトレーニング資料ですから、それを選ぶことはあなたにとって最高の選択です。IT専門家になりたいですか。そうだったら、Japancertを利用したください。

L4M1英語版: https://www.japancert.com/L4M1.html

• L4M1最新問題集、L4M1試験模擬、L4M1練習テスト 🚗 ⇛ www.passtest.jp ⇚で使える無料オンライン版[ L4M1 ] の試験問題L4M1トレーリング学習
• L4M1日本語独学書籍 🔵 L4M1ソフトウエア 😼 L4M1合格体験談 😷 URL ▶ www.goshiken.com ◀をコピーして開き、《 L4M1 》を検索して無料でダウンロードしてくださいL4M1合格率
• L4M1認定試験 🧬 L4M1関連資格試験対応 🆎 L4M1日本語独学書籍 🖱 【 www.it-passports.com 】を開いて➤ L4M1 ⮘を検索し、試験資料を無料でダウンロードしてくださいL4M1勉強時間
• L4M1参考書勉強 🦃 L4M1合格率 🌽 L4M1全真問題集 🧗 今すぐ✔ www.goshiken.com ️✔️で“ L4M1 ”を検索し、無料でダウンロードしてくださいL4M1日本語受験教科書
• 試験の準備方法-素晴らしいL4M1合格記試験-完璧なL4M1英語版 🚌 ✔ www.passtest.jp ️✔️の無料ダウンロード⇛ L4M1 ⇚ページが開きますL4M1過去問
• L4M1合格記を検索して,Scope and Influence of Procurement and Supplyの半分をパスします 👕 ▛ www.goshiken.com ▟に移動し、▷ L4M1 ◁を検索して、無料でダウンロード可能な試験資料を探しますL4M1難易度
• 試験の準備方法-効率的なL4M1合格記試験-完璧なL4M1英語版 💑 ☀ www.pass4test.jp ️☀️に移動し、「 L4M1 」を検索して無料でダウンロードしてくださいL4M1過去問
• L4M1難易度 📨 L4M1日本語独学書籍 😿 L4M1合格率 ⏸ ⇛ www.goshiken.com ⇚サイトで➡ L4M1 ️⬅️の最新問題が使えるL4M1トレーリング学習
• L4M1最新試験情報 ⬇ L4M1模擬問題 🐟 L4M1合格体験談 🔍 ✔ L4M1 ️✔️を無料でダウンロード【 www.japancert.com 】で検索するだけL4M1関連資格試験対応
• L4M1日本語独学書籍 🌁 L4M1合格体験談 🗾 L4M1合格率 🐔 ➥ www.goshiken.com 🡄の無料ダウンロード▶ L4M1 ◀ページが開きますL4M1認定試験
• CIPS 徹底攻略対応 L4M1 教科書 🤛 今すぐ⇛ www.xhs1991.com ⇚を開き、✔ L4M1 ️✔️を検索して無料でダウンロードしてくださいL4M1参考書勉強
• L4M1 Exam Questions
• fortuneebulls.com apc.youknowmiami.com avangardconsulting.com maitriboutique.in course.gurujothidam.com darzayan.com robreed526.loginblogin.com course.alefacademy.nl onlinelanguagelessons.uk academy.datacrossroads.nl